Current

SCPI Commands :

READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:CURRent
FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:CURRent
CALCulate:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:CURRent

class CurrentCls

Current commands group definition. 3 total commands, 0 Subgroups, 3 group commands

calculate(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) → List[ResultStatus2]

# SCPI: CALCulate:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:CURRent
value: List[enums.ResultStatus2] = driver.wlanMeas.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.current.calculate(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

spec_flat_trace_tx: Comma-separated list power level, one value per subcarrier (including data and pilot subcarriers) The number of subcarriers depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’.

fetch(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) → List[float]

# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:CURRent
value: List[float] = driver.wlanMeas.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.current.fetch(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

spec_flat_trace_tx: Comma-separated list power level, one value per subcarrier (including data and pilot subcarriers) The number of subcarriers depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’.

read(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) → List[float]

# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:CURRent
value: List[float] = driver.wlanMeas.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.current.read(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

spec_flat_trace_tx: Comma-separated list power level, one value per subcarrier (including data and pilot subcarriers) The number of subcarriers depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’.