Average

SCPI Commands :

READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
CALCulate:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage

class AverageCls

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

calculate(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) → List[ResultStatus2]

# SCPI: CALCulate:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
value: List[enums.ResultStatus2] = driver.wlanMeas.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.acarrier.average.calculate(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces over all carriers (complete FFTSize) for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

sflat_all_carr_tx: Comma-separated list of power levels, one value per subcarrier (including data, pilot and unused subcarriers) The number of power levels depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’.

fetch(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) → List[float]

# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
value: List[float] = driver.wlanMeas.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.acarrier.average.fetch(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces over all carriers (complete FFTSize) for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

sflat_all_carr_tx: Comma-separated list of power levels, one value per subcarrier (including data, pilot and unused subcarriers) The number of power levels depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’.

read(start: float = None, count: float = None, decimation: float = None, rxAntenna=RxAntenna.Default, stream=Stream.Default) → List[float]

# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:SFLatness:MIMO:RXANtenna<n>:STReam<s>:ACARrier:AVERage
value: List[float] = driver.wlanMeas.multiEval.trace.spectrFlatness.mimo.rxAntenna.stream.acarrier.average.read(start = 1.0, count = 1.0, decimation = 1.0, rxAntenna = repcap.RxAntenna.Default, stream = repcap.Stream.Default)

Return the spectrum flatness traces over all carriers (complete FFTSize) for Rx antenna <n> and stream <s>, for true MIMO measurements. The results of the current, average, minimum and maximum traces can be retrieved. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param rxAntenna:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘RxAntenna’)

param stream:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Stream’)

return:

sflat_all_carr_tx: Comma-separated list of power levels, one value per subcarrier (including data, pilot and unused subcarriers) The number of power levels depends on the WLAN standard, channel bandwidth and mode, see Table ‘OFDM subcarriers’.