Time

SCPI Commands :

READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:PVTime:REDGe:SEGMent<seg>:TIME
FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:PVTime:REDGe:SEGMent<seg>:TIME

class TimeCls

Time commands group definition. 2 total commands, 0 Subgroups, 2 group commands

fetch(start: float = None, count: float = None, decimation: float = None, segment=Segment.Default) → List[float]

# SCPI: FETCh:WLAN:MEASurement<Instance>:MEValuation:TRACe:PVTime:REDGe:SEGMent<seg>:TIME
value: List[float] = driver.wlanMeas.multiEval.trace.powerVsTime.risingEdge.segment.time.fetch(start = 1.0, count = 1.0, decimation = 1.0, segment = repcap.Segment.Default)

Return the time indices for the power vs time ramp traces, rising edge (REDGe) and falling edge (FEDGe) for SISO measurements and bandwidths > 160 MHz. The results are available for the left 160 MHz segment <1> and for the right 160 MHz segment <2>. Refer to method RsCMPX_WlanMeas.WlanMeas.MultiEval.Trace.PowerVsTime.FallingEdge.Segment.Current.fetch etc.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param segment:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

time_values: Comma-separated list of time indices corresponding to the ramp power results.

read(start: float = None, count: float = None, decimation: float = None, segment=Segment.Default) → List[float]

# SCPI: READ:WLAN:MEASurement<Instance>:MEValuation:TRACe:PVTime:REDGe:SEGMent<seg>:TIME
value: List[float] = driver.wlanMeas.multiEval.trace.powerVsTime.risingEdge.segment.time.read(start = 1.0, count = 1.0, decimation = 1.0, segment = repcap.Segment.Default)

Return the time indices for the power vs time ramp traces, rising edge (REDGe) and falling edge (FEDGe) for SISO measurements and bandwidths > 160 MHz. The results are available for the left 160 MHz segment <1> and for the right 160 MHz segment <2>. Refer to method RsCMPX_WlanMeas.WlanMeas.MultiEval.Trace.PowerVsTime.FallingEdge.Segment.Current.fetch etc.

Suppressed linked return values: reliability

param start:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param count:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param decimation:

For the optional query parameters start, count and decimation, see ‘Trace subarrays’.

param segment:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Segment’)

return:

time_values: Comma-separated list of time indices corresponding to the ramp power results.