Average

SCPI Commands :

READ:WLAN:MEASurement<instance>:MEValuation:MODulation:MIMO<n>:SEGMents:AVERage
FETCh:WLAN:MEASurement<instance>:MEValuation:MODulation:MIMO<n>:SEGMents:AVERage
CALCulate:WLAN:MEASurement<instance>:MEValuation:MODulation:MIMO<n>:SEGMents:AVERage

class AverageCls[source]

Average commands group definition. 3 total commands, 0 Subgroups, 3 group commands

class CalculateStruct[source]

Response structure. Fields:

Reliability: int: ‘Reliability indicator’
Evm_All_Carr_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Evm_All_Carr_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Evm_Data_Carr_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Evm_Data_Carr_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Evm_Pilot_Carr_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Evm_Pilot_Carr_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Power_Backoff_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Power_Backoff_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Burst_Power_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Burst_Power_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Peak_Power_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Peak_Power_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Crest_Factor_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Crest_Factor_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Iq_Offset_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Iq_Offset_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Dc_Power_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Dc_Power_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Ltf_Power_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Ltf_Power_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Data_Power_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Data_Power_Seg_2_Tx: enums.ResultStatus2: No parameter help available
Preamble_Power_Seg_1_Tx: enums.ResultStatus2: No parameter help available
Preamble_Power_Seg_2_Tx: enums.ResultStatus2: No parameter help available

class ResultData[source]

Response structure. Fields:

Reliability: int: ‘Reliability indicator’
Evm_All_Carr_Seg_1_Tx: float: No parameter help available
Evm_All_Carr_Seg_2_Tx: float: No parameter help available
Evm_Data_Carr_Seg_1_Tx: float: No parameter help available
Evm_Data_Carr_Seg_2_Tx: float: No parameter help available
Evm_Pilot_Carr_Seg_1_Tx: float: No parameter help available
Evm_Pilot_Carr_Seg_2_Tx: float: No parameter help available
Power_Backoff_Seg_1_Tx: float: No parameter help available
Power_Backoff_Seg_2_Tx: float: No parameter help available
Burst_Power_Seg_1_Tx: float: No parameter help available
Burst_Power_Seg_2_Tx: float: No parameter help available
Peak_Power_Seg_1_Tx: float: No parameter help available
Peak_Power_Seg_2_Tx: float: No parameter help available
Crest_Factor_Seg_1_Tx: float: No parameter help available
Crest_Factor_Seg_2_Tx: float: No parameter help available
Iq_Offset_Seg_1_Tx: float: No parameter help available
Iq_Offset_Seg_2_Tx: float: No parameter help available
Dc_Power_Seg_1_Tx: float: No parameter help available
Dc_Power_Seg_2_Tx: float: No parameter help available
Ltf_Power_Seg_1_Tx: float: No parameter help available
Ltf_Power_Seg_2_Tx: float: No parameter help available
Data_Power_Seg_1_Tx: float: No parameter help available
Data_Power_Seg_2_Tx: float: No parameter help available
Preamble_Power_Seg_1_Tx: float: No parameter help available
Preamble_Power_Seg_2_Tx: float: No parameter help available

calculate(mimo=Mimo.Default) → CalculateStruct[source]

# SCPI: CALCulate:WLAN:MEASurement<instance>:MEValuation:MODulation:MIMO<n>:SEGMents:AVERage
value: CalculateStruct = driver.wlanMeas.multiEval.modulation.mimo.segments.average.calculate(mimo = repcap.Mimo.Default)

Return the single value results for MIMO measurements and bandwidths > 160 MHz. The results are available per antenna for the left 160 MHz segment <1> and for the right 160 MHz segment <2>. There are current, average, minimum, maximum and standard deviation results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param mimo:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mimo’)

return:

structure: for return value, see the help for CalculateStruct structure arguments.

fetch(mimo=Mimo.Default) → ResultData[source]

# SCPI: FETCh:WLAN:MEASurement<instance>:MEValuation:MODulation:MIMO<n>:SEGMents:AVERage
value: ResultData = driver.wlanMeas.multiEval.modulation.mimo.segments.average.fetch(mimo = repcap.Mimo.Default)

Return the single value results for MIMO measurements and bandwidths > 160 MHz. The results are available per antenna for the left 160 MHz segment <1> and for the right 160 MHz segment <2>. There are current, average, minimum, maximum and standard deviation results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param mimo:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mimo’)

return:

structure: for return value, see the help for ResultData structure arguments.

read(mimo=Mimo.Default) → ResultData[source]

# SCPI: READ:WLAN:MEASurement<instance>:MEValuation:MODulation:MIMO<n>:SEGMents:AVERage
value: ResultData = driver.wlanMeas.multiEval.modulation.mimo.segments.average.read(mimo = repcap.Mimo.Default)

Return the single value results for MIMO measurements and bandwidths > 160 MHz. The results are available per antenna for the left 160 MHz segment <1> and for the right 160 MHz segment <2>. There are current, average, minimum, maximum and standard deviation results. The values described below are returned by FETCh and READ commands. CALCulate commands return limit check results instead, one value for each result listed below.

param mimo:

optional repeated capability selector. Default value: Nr1 (settable in the interface ‘Mimo’)

return:

structure: for return value, see the help for ResultData structure arguments.